Double Glazing Lock Repairs
A good quality lock on your doors and windows helps to prevent burglars from getting into your home. They generally don't like breaking glass or trying to wiggle through windows that are not closed.
Some owners of double glazing, however, have experienced problems with their window or door lock following the installation. Luckily, these problems are often fixable without having to pay for new double glazing.
Broken or faulty locks
A locksmith can repair your uPVC window or door lock if it's broken or faulty. They can fix hinges, striker plates and locks for your double-glazing. They can also move the cylinder to correct any misalignment that may cause your handle to work properly.
If the key fits inside the lock, but it doesn't turn or is difficult to insert then the mechanism may be stuck. Grease or dirt can get stuck in the mechanism. If this is the case, then it might be possible to clean the lock and then lubricate. It is crucial to make use of a dry lubricant such as graphite or teflon instead of oil which attracts dirt and stick to the interior of the mechanism. After you have lubricated the lock, you need to insert the key and try to turn it. The lubricant must get into the mechanism and the lock should turn easily.
A faulty lock can also be caused by loose screws in the lock mechanism. They may loosen and break off or fall out completely, preventing the lock from working properly. The screws can be tightened with a screwdriver, but you must be cautious not to tighten them too much. This could cause damage to the internal components.
A broken lock can be hazardous for your family and you. This is especially the case if you have children. They can easily unlock the door without your knowledge, giving them access to your home. If you're worried about the possibility that this might occur, a licensed professional locksmith can help you secure the double-glazed doors.
Misty Glaze are a professional uPVC and double glazing company in Lancing and can repair all types of faulty and broken mechanisms such as handles, cylinders, handles and lock systems for both uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your specific requirements, meaning that in a lot of cases replacement windows and doors are not necessary.
Handles that are damaged or faulty
Many double glazed windows feature the multi-point lock as part of the overall security package. This is a great option for those who are concerned about opportunistic burglars trying to gain entry to their home. Ask your installer about antilift blocks. They can be installed as an addition to the existing locks and can help keep your windows firmly closed.
It's not uncommon for handle locks to get damaged or fail - they are the first part of your window that could be forced open by criminals intent on breaking into. The good news is, this is among the easiest parts to repair.
Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism known as Espagnolette that is designed to ward off forced entry. This security upgrade is offered as an option with new uPVC windows. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot and again as an additional option on double-glazed windows.
If a handle is damaged, it is essential to get the handle repaired as quickly as possible. Faulty handles may prevent the window from closing properly and allow drafts to enter. It could also be a weak point that burglars who are opportunistic could exploit, therefore putting your belongings and family at risk of being stolen.
The process of repairing the malfunctioning mechanism begins by opening the window frame and then removing the damaged handle. The gearbox that opens the handle is then located and the model is identified so that a replacement can be sourced which matches the profile of the internal window frame mechanism.
After the mechanism is replaced, the handle may be reattached using the original screws. We recommend replacing them with longer screws since they provide the most secure fit. The final stage is to apply a website coating of clear sealant to shield the handle from further rust. After that the window will be operational again, and at a fraction of the cost of replacing the entire window.
Hinges that are Broken or Faulty
If your windows aren't shut properly, draughts could enter your home, the security barriers will become weaker and there's an increased risk of damp or water damage. Broken or defective window hinges are a typical issue that can be fixed easily.
If your uPVC windows won't open or shut and close, it's likely the hinges require to be repaired or replaced. While most window manufacturers require you to purchase a whole new window unit double glazed repairs near me in order to fix this simple problem, we're able to replace the faulty hinges and save you money.
Window hinges may break due to repeated use or may be weakened due to corrosion over time. In the event of a broken hinge, it's crucial to take measures to prevent further damage by taking care not to make the window swing open or closed.
Knowing the type of hinge you have will help you locate the correct parts to fix it. Maco, Mila and Roto are all brands of window hinges. It is recommended to consult an expert in this situation to ensure that you don't make the mistake of buying parts that aren't compatible with your existing hardware and cause further damage.
A faulty hinge is a major problem for uPVC doors and windows. They can be a major source of noise, and could also allow water to enter your windows.
Make sure that the pin barrels on both hinge halves are aligned. If it isn't tapping the headpin, use a hammer in order to create a slight bend in the hinge barrel. This will help keep the pin in place. Ask a second person to hold the door as you take more info the hinge screws and hinges from both the doorjamb and the door. Replace the hinges and attach screws using glue. Finally put the hinges in place using clamps or weights until the glue dries.
After you have repaired your hinges, you can put the door back in place. You can also reattach the handle. It is recommended to replace the screws using the same length of dowels as the screw that was originally used so that they align with each one.
Broken or damaged glass
uPVC Windows can be damaged in time, despite the fact they are excellent at keeping cold out and retaining warmth. This can include broken or damaged glass and faulty locks. This is an issue that can be costly when neglected. It can also hurt the appearance of your home and can result in a decrease in insulation. It is essential to fix any damage as soon as it occurs.
You can fix your cracked glass by yourself if your have the proper tools and techniques. Make sure the area around the read more broken glass is free of debris, so that shards do not cause injury or trip hazards. Then, you must remove any pieces of broken glass and dispose of them in a safe manner. Apply masking tape to the entire area. This will stop glass fragments from sticking to your skin and scattering when you move them. If you're dealing with a double-pane window it's a good idea to prepare the glass before glueing it back in place to ensure that you'll have enough space finish the project.
Before applying the glue, clean the surface of the damaged frame and the glass with a a dry, clean cloth. Follow the curing and application directions that differ from product to product. Depending on the degree of the crack you may need to hold the glass in place during the curing process with lightweight clamps specifically designed to support fragile materials.
Once the adhesive is fully cured, carefully reinstall the glass inside the window frame, ensuring it's website flush with the edge of the frame and there aren't any gaps between the glass and the window sash. Be careful not to bend the window as it's being put back in place, as this can weaken the seal and cause water infiltration and condensation.
Get in touch with a professional glazier, such as O'Brien(r), to arrange an appointment to replace your glass if the window is completely broken. Leaving broken glass unattended can pose a safety risk for pet and children and is why it's important to act fast.